Rev. G: [IT-4] [BEM(-1, -.5)]
50 C. is 1.25 and low. 5 is much higher than 0.
A-A is 0.5 mm.

Obv. 5: [S7-0(2)_S8(0)_S13(3)_S1(5)]
Date is 8.0 mm. and evenly spaced. 5 is tipped sharply to left.

Rev. I²: [IT-4] [BEM(0, 0)]
50 C. is 1.5 mm. A-A is 0.25 mm.

Obv. 6²: [S7-0(0)_S8(4)_S13(4)_S1(3)]
Date is 8.0 mm. 2 has a thick base and a long sharp point to curl. Curl of 2 points to I of LIBERTY.

Rev. I¹: [IT-4] [BEM(0, 0)]
50 C. is 1.5 mm. A-A is 0.25 mm.

Obv. 7: [S7+1(1)_S8(5)_S13(0)_S1(4)]
Date is 8.25 mm. and 8 leans sharply to left. Stand of 2 is thin and nearly broken where it joins base of 2.

Rev. H: [IT-3] [BEM(0, 1.5)]
50 C. is 2.25 mm. A-A nearly touch.

Obv. 6¹: [S7-0(0)_S8(4)_S13(4)_S1(3)]
Date is 8.0 mm. 2 has a thick base and a long sharp point to curl. Curl of 2 points to I of LIBERTY.

Rev. C²: [IT-2] [BEM(0, 2)]
50 C. is 1.75 mm. A-A is 0.75 mm.

Obv. 2³: [S7+1(4)_S8(3)_S13(5)_S1(1)]
Date is 8.0 mm. and evenly spaced.

Rev. C¹: [IT-2] [BEM(0, 2)]
50 C. is 1.75 mm. A-A is 0.75 mm.

Obv. 15: [S7-0(3)_S8(3)_S13(1)_S1(4)]
Heavy die crack extends from lower edge to curls passing between 2 and 5.

Rev. F: [IT-2] [BEM(.5, 1.5)]
50 C. is 1.75 mm. A-A nearly touch.

Obv. 4: [S7+1(2)_S8(0)_S13(5)_S1(5)]
Date is 8.0 mm. with 5 recut below curve at top.

Rev. J: [IT-2] [BEM(0, 2)]
50 C. is 2.25 mm. and set low, with all three units very broadly doubled. A-A is 0.75 mm.

Obv. 8: [S7-2(0)_S8(5)_S13(0)_S1(4)]
Date is 8.25 mm.

Rev. L: [IT-2] [BEM(2, 2)]
50 C. is 1.75 mm. and low. A-A is 0.5 mm.

Obv. 10: [S7-2(5)_S8(2)_S13(2)_S1(0)]
Date is 8.25 mm. with short, sharp point to curl of 2.

Rev. O: [IT-2] [BEM(1, 1)]
50 C. is 1.5 mm. and a shade low, with a well formed 5. A-A is 0.5(+) mm.

Obv. 13: [S7-0(5)_S8(0)_S13(2)_S1(1)]
Date is 8.25 mm. and rather low.

Rev. P: [IT-2] [BEM(1, 0)]
50 C. is 1.5 mm. A-A is 0.25 mm.

Obv. 14: [S7-2(4)_S8(4)_S13(5)_S1(0)]
Date is 8 mm. with 5 recut at front of stand.

Rev. B: [IT-1] [BEM(0, 4)]
50 C. is 2.25 mm. A-A is 1.25 mm.

Obv. 2¹: [S7+1(4)_S8(3)_S13(5)_S1(1)]
Date is 8.0 mm. and evenly spaced.

Rev. N: [IT-1] [BEM(1, 1)]
50 C. is 1.5 mm. and low. A-A is 0.5 mm.

Obv. 12: [S7-1(0)_S8(4)_S13(4)_S1(4)]
Date is 8.0 mm. with 5 tipped sharply to left and sharp points on curl and serif at 2.

Rev. D: [IT-0] [BEM(0, 2)]
50 C. is 2.0 mm. A-A is 0.75 mm.

Obv. 2²: [S7+1(4)_S8(3)_S13(5)_S1(1)]
Date is 8.0 mm. and evenly spaced.

Rev. K: [IT-0] [BEM(2, 2)]
50 C. is 1.5 mm. and low. A-A is 1.0 mm.

Obv. 9: [S7-1(5)_S8(0)_S13(2)_S1(3)]
Date is 8.0 mm. with 82 very close and base of 2 lower than other figures. 2 is widely recut.

Rev. M: [IT-0] [BEM(2, 1.5)
50 C. is 1.75 mm. A-A is 0.25(+) mm.

Obv. 11: [S7-1(4)_S8(3)_S13(5)_S1(3)]
Date is 8.25 mm. and low. 18 is wider than 825. 1 is high and leans right and is recut at left.

Rev. E: [IT+1] [BEM(1, 3)]
50 C. is 2.0 mm. with 5 tipped to left. A-A is 1.0 mm.

Obv. 3: [S7+2(4)_S8(4)_S13(1)_S1(4)]
Date is 8.0 mm. with 82 the closest.

Rev. A: [IT+2] [BEM(1.5, 4.5)]
50 C. is 2.25 mm. A-A is 1.25 mm.

Obv. 1: [S7-3(3)_S8(3)_S13(2)_S1(5)]
Date is 8.25 mm. and low.

Rev. A: [IT-3] [BEM(.5, 1.5)]
50 C. is 1.5 mm. A-A nearly touch.

Obv. 1: [S7-0(0)_S8(4)_S13(1)_S1(0)]
Date is 9.0 mm., with a sharp needle like point on curl of 2. Die crack joins date at base and extends to left of 1.

Rev. B: [IT-3] [BEM(1, 2)]
50 C. is 1.5 mm. A-A is 0.25 mm.

Obv. 2¹: [S7-3(5)_S8(2)_S13(0)_S1(4)]
Date is a close 8.0 mm. and 6 is sharply higher than 182.

Rev. D: [IT-2] [BEM(1, 0)]
50 C. is 1.5 mm. A-A is 0.25 mm.

Obv. 3²: [S7-0(0)_S8(1)_S13(1)_S1(0)]
Date is 8.25 mm., tall and close, with plain 2 with needle like point.

Rev. I: [IT-2] [BEM(.5, 1)]
50 C. is almost 2.0 mm. A-A nearly touch.

Obv. 6: [S7+1(4)_S8(3)_S13(2)_S1(0)]
Date is 8.0 mm. with 82 very close at top, much closer than 18 or 26.

Rev. L: [IT-2] [BEM(2, 2)]
50 C. is 1.5 mm. and high, with a large C.
A-A nearly touch.

Obv. 8: [S7-0(2)_S8(1)_S13(0)_S1(4)]
Date is a close 8.0 mm. with tall figures. 2 has a straight base with tiny serif, tall stand, and a short curl with sharp point.

Rev. C: [IT-1] [BEM(2, 2)]
50 C. is 1.5 mm. and low. Upright of 5 is distinctly recut. A-A is 0.5 mm.

Obv. 2²: [S7-3(5)_S8(2)_S13(0)_S1(4)]
Date is a close 8.0 mm. and 6 is sharply higher than 182.

Rev. E: [IT-1] [BEM(1, 2)]
50 C. is 1.5 mm. A-A is 0.75 mm.

Obv. 3¹: [S7-0(0)_S8(1)_S13(1)_S1(0)]
Date is 8.25 mm., tall and close, with plain 2 with needle like point.

Rev. H: [IT-1] [BEM(1, 3.5)]
50 C. is 1.5 mm. A-A is 1.0 mm.

Obv. 5: [S7+1(3)_S8(2)_S13(2)_S1(4)]
Date is 8.25 mm., with numerous die lines in field left of 1 in date on most.

Rev. R: [IT-1] [BEM(2, 1.5)]
50 C. 2.0 mm. and well centered. A-A is 0.25 mm.

Obv. 13²: [S7+1(3)_S8(5)_S13(0)_S1(3)]
Date is 9.0 mm. 2 is very short and 26 is progressively higher than 18.

Rev. K¹: [IT-0] [BEM(2, 1)]
50 C. is 1.25 mm. A-A is 0.75 mm.

Obv. 7²: [S7-0(5)_S8(4)_S13(3)_S1(3)]
Date is 8.0 mm. with 82 closer than 18 or 26. 8 is recut in upper loop at left. 2 has a blunt end.

Rev. K²: [IT-0] [BEM(2, 1)]
50 C. is 1.25 mm. A-A is 0.75 mm.

Obv. 10¹: [S7+2(4)_S8(2)_S13(4)_S1(4)]
Date is 8.5 mm. with top of 2 lower than 186. Recut 8 at right of upper loop.

Rev. Q: [IT-0] [BEM(2.5, 1.5)]
50 C. is 2.25 mm. A-A is 0.25 mm.

Obv. 12: [S7-0(0)_S8(4)_S13(2)_S1(3)]
Date is 8.0 mm. and evenly spaced.